I've noticed some odd behavior when the overlay needs to be re-sized:

First off, if the overlay needs to be resized larger, and the top and bottom values are the same (IE top = 100, bottom = 100) the image gets a large black bar across it. (The same error occurs when left and right values equal each other.) If one or the other is changed (IE top = 100, bottom = 101) then no black bar appears.

Secondly, if the overlay needs to be resized smaller the center left, center and center right grid pieces are placed too high. This is very evident if the overlay image is partially transparent as the transparencies are layered creating a darker stripe across the image.

Let me know if you'd like any more information or example images of these errors.

Comments

edegro’s picture

edegro commented
Status: Active » Needs work
edegro’s picture

edegro commented

I'm not able to recreate this problem. If you still happen to have the preset that this is happening with, could you list the action details and the image you're trying to use as the overlay? This was posted months ago so that's probably not very likely. I was just far too busy to look at it in detail unfortunately. Thanks.