How do you let an AI agent read Drupal data without misreading it?

Posted by Giorgio Pagano - 5 Nov 2026 at 18:35 UTC

The Drupal drop passes a p95 chart through a read-only MCP gate to an AI assistant, which shows it as a dashboard.

Native Observability started as a way to look inside Drupal with a dashboard of its own: route timings, cache and slow queries, measured by the site and read by a person on an admin page. Now an AI agent reads the same data. Ask Claude Desktop "why is this page slow?" and it fetches the numbers through the Model Context Protocol, read-only.

Handing a model the numbers is not enough, though. It reads them with common sense, and on Drupal metrics common sense fails in specific places. In my first blind comparison, 4 answers out of 5 took a drop caused by the page cache for lost traffic, even with the right instructions in front of them.

Better instructions alone did not fix it. The site now computes the signals the model would get wrong, and explains the rest with a vocabulary checked sentence by sentence against the code. In the last round, with the vocabulary on, Claude reached the right conclusion in 30 answers out of 30.

What leaves the site follows a simpler rule than a list of forbidden words: route names go out, never a URL or a parameter value. This article covers the measurements, the mistakes I found along the way, the questions you can ask and what you need to connect an agent to your own site.

Read more

Categories: Planet Drupal

Why AI builds better and faster on the shoulders of giants

Posted by Fons Vandamme - 5 Nov 2026 at 17:13 UTC

Image of a person standing on a giant

The best code your AI writes is the code it never has to write. 

When building on top of Drupal there is luckily a lot of that.

Categories: Planet Drupal

Drupal's Role in Digital Sovereignty Beyond the CMS

Posted by The Drop Times - 5 Nov 2026 at 14:28 UTC
Replacing a proprietary CMS does not automatically give governments control over their digital services. Five Government Summit speakers examine the responsibilities that come with adopting open source.
Categories: Planet Drupal

What University Drupal Projects Reveal About the Limits of Vendor Independence

Posted by The Drop Times - 5 Nov 2026 at 12:58 UTC
Universities can replace a CMS or reorganise their websites without knowing how difficult it would be to change providers again. The missing evidence lies in contracts, documentation and the cost of transferring technical responsibility.
Categories: Planet Drupal

Benchmarking Drupal: Mitigating Synchronous Database Locking in High-Concurrency Environments

Posted by joshics.in - 5 Nov 2026 at 08:49 UTC
Benchmarking Drupal: Mitigating Synchronous Database Locking in High-Concurrency Environments bhavinhjoshi 05/11/2026

Drupal’s architecture provides a highly refined routing and rendering ecosystem. When deployed behind caching layers like Varnish or Redis, serving read-heavy content is a solved problem. However, engineering mission-critical platforms, such as SLA-backed procurement portals, ticketing engines, or high-volume transaction systems, requires shifting the architectural focus from read-heavy delivery to high-concurrency write stability.

When utilizing Drupal for state management or complex relational entity saves during peak traffic, default synchronous mechanisms become a critical bottleneck.

The Core Culprit: Synchronous Key-Value Upserts

In a standard deployment, Drupal manages temporary data, system variables, and specific configurations through the State API. By default, this API utilizes the database-backed Key-Value store.

The architectural vulnerability lives directly inside \Drupal\Core\KeyValueStore\DatabaseStorage::doSet(), which handles the underlying database execution for the public set() method.

Read more

Categories: Planet Drupal

Goose 0.19: Watch Your Load Test While It Runs

Posted by Tag1 Insights - 5 Nov 2026 at 00:00 UTC
Take Away Tag1 Founding Partner and CEO Jeremy Andrews, introduces Goose 0.19, which adds a live browser dashboard, pass/fail thresholds that can fail a CI build, response times to the microsecond, and peak memory cut from 959 MiB to 214 MiB at 1,000 users. Its companion crate, goose-eggs 0.7, adds helpers for load testing WordPress and WooCommerce sites.

Goose 0.19, the latest release of Tag1's open source load testing tool, lets you watch a load test in your browser while it runs. Response times, errors and active users update every second, so when a site starts to slow down you see it as it happens. Alongside it, goose-eggs 0.7 adds helpers for load testing WordPress and WooCommerce sites, and Goose itself can now fail a CI build when a site gets slower, keeps every response time to the microsecond, and runs in a quarter of the memory or less.

We compared Goose against k6 and Locust, all three in the same configuration of 1,000 users over HTTPS, running on the same two cores against the same web server. Goose sent 21,400 requests a second, against 15,800 for k6 and 8,400 for Locust, using less CPU per request than either and a fraction of the memory. The full results, and how we ran each tool, are found in this blog under the heading Compared with k6 and Locust.

An overview of what's new in Goose 0.19. Watch a Load Test in Your Browser

There's no new code to write. Any Goose 0.19 load test gets the live web dashboard once you turn on the experimental dashboard feature in Cargo.toml:

Read more

Categories: Planet Drupal

Drupal and n8n integration: connect forms, content, and business systems

Posted by Droptica - 4 Nov 2026 at 18:51 UTC
Bureau avec des tubes pneumatiques transparents reliant un nœud central aux postes de travail A Drupal n8n integration can send form submissions to a CRM, create Drupal drafts from approved content in other systems, and trigger downstream work after publication. Learn which modules and APIs to use and how to keep the workflows dependable.
Categories: Planet Drupal

Inside the Drupal AI Demo: Testing the Northmoor University Site

Posted by The Drop Times - 4 Nov 2026 at 17:26 UTC
The demo keeps publishing decisions with editors. Hands-on testing also reveals where its AI tools still fall short.
Categories: Planet Drupal

Théodore Biadala on Building Drupack, Simplifying Drupal Hosting and What Comes Next

Posted by The Drop Times - 4 Nov 2026 at 13:49 UTC
Drupack promises a simpler way to run and deploy Drupal, but packaging the runtime is only part of the challenge. Creator Théodore Biadala discusses automated security updates, cross-platform testing, database performance, and the work needed to make the project practical for more developers.
Categories: Planet Drupal

Hello World

Posted by Lauri Timmanee - 4 Nov 2026 at 10:10 UTC

Long overdue. Turns out building your own blog with your own product is a good way to find things to fix.

Categories: Planet Drupal

A look under the hood of how Drupal CMS 2.2 recipes speak your language too

Posted by Gábor Hojtsy - 4 Nov 2026 at 09:17 UTC
A look under the hood of how Drupal CMS 2.2 recipes speak your language too

Did you know that before Drupal CMS 2.2, if you set up Drupal CMS in German and applied a recipe, its content types, views and roles stayed in English? Recipes are a big part of how Drupal CMS delivers features, so this was a sizable hole in the multilingual experience. Until a few months ago, recipes could not even be translated on localize.drupal.org. So we did a few things to make this possible ahead of DrupalCon Rotterdam. Here are the details.

Gábor Hojtsy Wed, 11/04/2026 - 11:17
Categories: Planet Drupal

Manufacturing Website Design: What the Fortune 500 Ships, and Where Drupal Fits

Posted by Gspikes - 4 Nov 2026 at 07:00 UTC
Manufacturing website design from 53 Fortune 500 manufacturer sites and 25 Drupal builds: catalogs, dealer locators, quote paths and what they run on.
Categories: Planet Drupal

Drupal 10 end of life: upgrade to Drupal 11 before 9 December

Posted by Pivale - 4 Nov 2026 at 00:00 UTC
Drupal 10 reaches end of life on 9 December 2026, the same week Drupal 12 arrives. Here’s why your next move is Drupal 11, and why you need to start now.
Categories: Planet Drupal

Drush Deployment Hooks vs. Drupal Update Hooks: Choosing the Right Tool

Posted by Aten Design Group - 3 Nov 2026 at 22:15 UTC
Drush Deployment Hooks vs. Drupal Update Hooks: Choosing the Right Tool admin Tue, 11/03/2026 - 15:15 Drupal

Drupal deployments often involve more than deploying code and importing configuration. Sometimes we need to update existing content, migrate stored data, or perform operations that depend on newly deployed configuration.

Drupal provides update hooks for these tasks, but their execution order introduces an important limitation. Drush deployment hooks address that limitation by allowing code to run after configuration has been imported.

Understanding when each hook executes helps prevent deployment failures and makes updates more predictable.

Understanding Drupal's deployment sequence

The drush deploy command provides a standardized deployment workflow. In current versions of Drush, the essential sequence is:

drush updatedb
drush config:import
drush cache:rebuild
drush deploy:hook

Three types of hooks participate in this process:

HookExecutionPrimary purposehook_update_N()During updatedbDatabase schema and low-level updateshook_post_update_NAME()After update hooks, before config importEntity and data updates using Drupal APIshook_deploy_NAME()After config importOperations requiring newly deployed configuration

The distinction matters because Drupal's active configuration may be different at each stage of deployment.

Read more

Categories: Planet Drupal

From Malloc to Match (Part 2): The Evolution of PHP Through the Lens of a Systems Programmer

Posted by Tag1 Insights - 3 Nov 2026 at 21:15 UTC
Take Away Jeremy Andrews, Tag1's Founding Partner and CEO, follows PHP and Drupal from the Symfony-driven rebuild of Drupal 8, through PHP 7's engine rewrite that shrank a typical value from about 48 bytes to 16, to Drupal 11.4, which needs just over a third of the database and cache lookups of Drupal 11.0 on a cold cache. He also shows how fixes from a Tag1 audit of London.gov.uk cut its slowest requests from about 75,000 database queries to 10,000.

This is Part 2 of a two-part series. Part 1 traced PHP's evolution from a C library wrapper through Drupal 7, where the procedural model hit its ceiling. This part covers the Java-fication of Drupal, the engine-level work that saved PHP from itself, and what Drupal and PHP are getting right about performance now.

The year Drupal 8 development started, we were publishing Drupal Watchdog, a print magazine that we shipped to subscribers around the world. I mention this because the magazine's lifespan, 2011 through 2016, almost exactly tracks the development of Drupal 8. We started it because the Drupal ecosystem felt like it could sustain anything. By the time we wound it down, the community had been through the most disruptive transition in the project's history.

Read more

Categories: Planet Drupal

Elevating Multilingual Precision in Drupal 12: Configuration Language Consistency

Posted by ImageX - 3 Nov 2026 at 19:20 UTC

Companies embrace multilingual functionalities to connect more deeply with global audiences. As an enterprise-level CMS, Drupal provides robust multilingual capabilities, making it simple to manage content, interface elements, and underlying configuration across multiple languages. 

Categories: Planet Drupal

Why your Drupal bug backlog keeps growing: the triage bottleneck explained

Posted by Droptica - 3 Nov 2026 at 18:54 UTC
Un spécialiste du support, casque sur les oreilles, sourit légèrement en travaillant sur un portable la nuit, avec les lumières de la ville derrière lui. A growing bug backlog rarely means that your Drupal platform suddenly has too many bugs. More often, it means that too much work enters the system without triage, ownership, approval, and protected capacity. That is where even a capable agency can get stuck.
Categories: Planet Drupal

Node2Shell: Updating npm Packages Won’t Fix This Node.js Flaw

Posted by Dynamosys Insights - 3 Nov 2026 at 17:13 UTC

 The vulnerability beneath your application. Illustration of compressed data entering a server with a red fracture in its core.

A Brotli decoder flaw in Node.js can lead to remote code execution. Updating npm packages doesn’t replace the runtime, so check the Node.js version wherever it runs: containers, build pipelines, a Drupal site’s decoupled front end, and DDEV.

Categories: Planet Drupal

Vibing Drupal - My Tips and Tricks for 10x Drupal Development using AI

Posted by Jacob Rockowitz - 3 Nov 2026 at 16:32 UTC

Looking back on a year of AI experimentation, I want to document my tips and tricks for using AI with Drupal development. Early in this journey, after reading books like Beyond Vibe Coding, listening to the creator of Claude Code, and attending Drupal events, I saw and heard how people using AI dramatically increased their productivity.

I keep coming back to Kent Beck's quote: "The value of 90% of my skills just dropped to $0. The leverage for the remaining 10% went up 1000x. I need to recalibrate." It led me to conclude that my goal when using AI is to 10x my productivity by focusing on that remaining 10%: experience, judgment, and understanding of how Drupal works.

Here are my tips and tricks to 10x my productivity using the remaining 10% of my skills. I am highlighting those that can 2x productivity and lead you toward 10x and beyond.

Funny side note: when I asked AI to review this post, it was really unhappy that the 2x tips math didn't add up to 10x, but you get the goal of this post. My hope is that you'll scan or consume this list, take something away, and keep up with our fast-moving times.

AI

Models

I like the output and price of GPT-5.6 Luna. I’d heard that in Ultra mode it rivals the more expensive models, but when I tried it, the code was worse and it took longer.

Read more

Categories: Planet Drupal

Drupal User Session Control: Balancing Security and User Experience

Posted by ImageX - 3 Nov 2026 at 16:11 UTC

To make sure your Drupal website security is as comprehensive as possible, you need to address a critical potential vulnerability: inactive or abandoned user sessions. Leaving them open may quietly create a back door for unauthorized access. 

Categories: Planet Drupal

Pages

Subscribe with RSS Subscribe to Drupal.org aggregator